Palm Beach County · Water Heater Installation

Tank & tankless water heater installation, sized for your home.

Gas, electric, or hybrid — we install and replace every type of water heater in Palm Beach County, including full tankless conversions. Upfront pricing, permitted installs, and a free on-site estimate before any work begins.

Tankless & tank installsGas · Electric · HybridFL hard-water ready
A new water heater installation inside a Palm Beach County home
Licensed & Insured  24/7 Emergency Service Upfront, Written Pricing Palm Beach County Local
Tank & tankless installation

A water heater built for how your household actually runs

Whether you are replacing a leaking tank, upgrading to a tankless water heater for the first time, or sizing up for a growing family, we handle every type of water heater installation in Palm Beach County — gas, electric, propane, hybrid heat-pump, and whole-house tankless. Every job is permitted, inspected, and backed by a written warranty.

Before you call anyone, use our free plumbing cost estimator to see real tankless and tank install ranges for your home size and fuel type. Knowing the number going in is the single best way to avoid sticker shock and make a confident decision between tank and tankless — or between one brand and another. A firm written price follows the free on-site visit.

Palm Beach County’s hard water is hard on water heaters. Scale builds on heating elements and tankless heat exchangers, cutting efficiency and shortening lifespan by years. We include a water-hardness assessment with every installation and can add a scale filter or whole-home softener in the same visit — so the new unit is protected from day one.


Know the signs

When to replace, not repair, your water heater

Most water heaters give clear warning before they fail. Two or three of these usually mean replacement is the smarter spend than another service call — especially heading into hurricane season.

Rust or sediment in hot water

Discolored or gritty hot water means the tank is corroding from the inside. Once rust starts, the tank cannot be saved — only replaced.

The unit is 10+ years old

Tank water heaters last 10–15 years in FL hard water. Past ten years, repairs compound and failure risk climbs — often at the worst possible moment.

Running out of hot water

If your tank can’t keep up with your household, you need a larger tank or a tankless upgrade — no repair will fix an undersized unit.

Water pooling around the base

A puddle under the tank usually means a failing pressure-relief valve or a pinhole in the tank. Replace before it lets go completely.

Popping or rumbling sounds

Sediment baking on the heating element causes banging. In Palm Beach County hard water, this usually means the tank is near the end of its life.

Rising energy bills

A water heater losing efficiency works longer to deliver the same heat — visible as a steady climb in your electric or gas bill long before the unit fails.

Compare your options

Tank vs. tankless — choosing the right system

Both work. The right choice depends on your household size, fuel type, budget, and how long you plan to stay. Run the numbers with our free cost estimator before you decide.

Water heater options for a Palm Beach County home
Standard tankHybrid heat-pumpTankless gasTankless electric
Typical lifespan 10–15 yrs12–15 yrs20+ yrs20+ yrs
Hot water supply Limited by tank sizeLimited by tank sizeUnlimited on demandUnlimited on demand
Energy efficiency BaselineUp to 3× more efficient20–30% savings vs. tank30–50% savings vs. tank
Relative install cost $$$$$$$$$
Best for Budget replacement, smaller homesElectric homes, hot FL climateGas homes, large familiesSolar / net-metering homes

Not sure which system fits your home? Our free tankless water heater cost estimator walks through each option with typical Palm Beach County install ranges — the fastest way to a real number before you call anyone.

A family enjoying unlimited hot water in their Palm Beach County home
Live it every day

Endless hot water — no more cold showers, no more waiting

A new water heater is one of those upgrades you feel every single day. Showers that never run cold, a dishwasher that actually cleans, a utility bill that stops climbing. Tankless goes one step further: it heats water the instant you open a tap and shuts off the moment you close it — so your energy dollar only goes to water you actually use.

See Tankless Cost Ranges

By the numbers

Why homeowners in Palm Beach County choose tankless

+20 yrs
Tankless water heater lifespan
30 %
Typical energy savings vs. a standard tank
$0
Cost of the on-site estimate
24 /7
Emergency plumbing response available

Curious what tankless installation costs in Palm Beach County? Our free estimator gives you real install ranges by fuel type in under a minute.

Open the Cost Estimator
The Palm Beach plumbing difference

What a proper water heater installation looks like in Palm Beach County

Installing a water heater in Palm Beach County has a few wrinkles most out-of-county contractors miss: hard water chemistry, Florida permitting, expansion-tank requirements, and matching the unit to your actual gas or electrical capacity.

HARD WATER Palm Beach County's supply is mineral-rich — it deposits scale inside every tank and on tankless heat exchangers, cutting efficiency and shortening lifespan. We always assess hardness and recommend scale filtration or a softener sized to protect your investment.
FL PERMIT REQUIRED Florida requires a permit for water heater replacement — not just new construction. We pull the permit, meet the county inspector, and hand you the closed paperwork so your warranty and homeowner's insurance stay valid.
EXPANSION TANK Most Palm Beach County homes with a check valve or pressure-reducing valve need a thermal expansion tank alongside the new water heater. Without one, pressure spikes shorten the unit's life and can void the manufacturer warranty. We check for it and install one if needed.
SIZING RIGHT Undersizing is the biggest reason tankless units disappoint. We calculate your peak flow rate — showers, sinks, and appliances running at once — and match the BTU or kW rating exactly so you never run cold at full demand.
What to expect

How a water heater installation actually goes

It starts with an on-site visit, not a phone guess. We check your existing unit, gas-line or electrical-panel capacity, water pressure, and hardness — then walk you through the right system and hand you a firm written price. Our cost estimator gives you a realistic range beforehand so you know what to expect before we arrive.

On install day we shut off the water and fuel supply, disconnect and haul away the old unit (no mess left behind), and rough in any new gas line, venting, or electrical circuit the new system requires. For tankless conversions this often means upsizing the gas line to the correct BTU delivery or adding a dedicated 240 V circuit — the step that separates a right-sized installation from one that never quite delivers enough hot water under load.

The new unit goes in, we pressure-test every connection, verify the county permit inspection, and walk you through the controls and maintenance schedule before we leave. For tankless units we set the ideal output temperature and show you how to flush the heat exchanger annually — the single biggest factor in reaching that 20+ year lifespan. Need us faster? Call any time: (561) 269-4831 24/7 for water heater emergencies.


What it costs

Tankless water heater cost in Palm Beach County

There is no honest flat price for a new water heater — the cost depends on fuel type, the required gas-line or electrical upgrades, whether a permit, expansion tank, or venting work is needed, and the brand and BTU (or kW) rating you choose. A straight tank-for-tank swap at the same location and fuel type is the most straightforward; a full tank-to-tankless conversion with a new gas line and venting is a larger project. The fastest way to a realistic Palm Beach County range is our free estimator below.

We also offer financing for larger jobs and will flag whether a rebate applies to qualifying high-efficiency or heat-pump units. After you run the estimator, a free on-site visit gives you a firm written quote itemized so you can see exactly where the money goes.

Open the Free Cost Estimator

Water heater FAQ

Common questions about water heater installation

How much does a tankless water heater cost to install in Palm Beach County?

The total cost depends on fuel type (gas, electric, or propane), existing gas-line or panel capacity, venting requirements, and whether a permit or expansion tank is needed. Use our free plumbing cost estimator to get a realistic range for your home and fuel type, then book a free on-site visit for a firm written price — no guesses over the phone.

Tank or tankless — which is right for my home?

Tankless units heat water on demand, never run out, and use 20–30% less energy than a conventional tank. They cost more up front but last 20+ years versus 10–15 for a tank. For most Palm Beach County homes — especially those with multiple bathrooms or high demand — tankless is the better long-term value. A conventional tank remains the lower-cost choice if your budget or gas-line size limits the upgrade. We help you weigh both options and price them before you decide.

How does Florida's hard water affect my water heater?

Palm Beach County's water supply is high in dissolved minerals that deposit as scale inside tanks and on tankless heat exchangers — cutting efficiency and shortening lifespan by years. We recommend pairing every new water heater with a scale filter or whole-home softener, and for tankless units we set up an annual flush schedule. We assess your water hardness on the first visit and size the right protection in the same appointment.

Do I need a permit to replace a water heater in Palm Beach County?

Yes — Florida requires a permit for any water heater replacement, not just new installs. We pull the permit, schedule the county inspection, and hand you the closed paperwork before we leave, so your installation is fully code-compliant and your homeowner's insurance remains valid. Skip the permit with an unlicensed contractor and you risk voiding the unit warranty and complicating a future home sale.

How long does a water heater installation take?

A straight tank-for-tank swap at the same location and fuel type typically runs 2–3 hours. Converting from a tank to tankless takes longer — usually 4–6 hours — because we re-run or upsize the gas line (or add a dedicated 240 V circuit), install new venting, and fit any required expansion tank or filtration. We schedule the full job in one visit so you're never without hot water overnight.
Get a free estimate

Ready for a new water heater? Get a free on-site estimate.

A local licensed plumber visits, inspects your existing equipment and gas or electrical supply, recommends the right system for your household, and hands you a firm written price — with financing options and no pressure.

indicates a required field

Free, no-obligation in-home estimate. We typically respond within one business day — no call center.